DCC Concepts Decoders Etc

Please note; We are closed from Friday 23rd August to Tuesday 3rd September. Normal opening hours from Wednesday 4th September.

Home About Us Brands Stocked Search Model Railway Slot Cars Model Kits Servicing Location How To Order Testimonials FAQ Contact Us

DCC Concepts of Australia produce a wide range of electronic items to enhance the running of your layout, for both Analogue and Digital setups.

From loco and accessory decoders, to the cobalt range of point motors, switches and electrical accessories.

As well as the huge range of electrical and wiring accessories that DCC Concepts produce they also make a huge variety of other products for the model railway enthusiast from wheelsets to weathering powder, track cutters to platform lighting.

All our DCC Concepts loco decoders are supplied with stay alive units which are designed to aid your locomotives running characteristics during slow running, these basically keep the decoder "alive" for a few milliseconds if dirt or dead spots are located on the track.

	DCC Concepts DCD-ZN6D Loco Decoder Zen 6 Pin Direct plug-in decoder with stay alive unit The decoder offers slow running characteristics and as it is the smallest decoder in the range you will always find places to house it. Decoder Size - •Length: 13.5mm •Width: 8.5mm •Depth: 3mm Motor drive rating 750mA/1amp, 2 Functions. Each - £26.95 5 Pack - £119.95 (to order)
	DCC Concepts DCD-ZN68 Loco Decoder ZEN 6 PIN VERSATILE 2 Function Decoder with Stay Alive. Much like its "bigger brothers" the N68 decoders have very smooth motor drive characteristics which allow for slow speed running even inside N scale locomotives. These decoders are small enough to fit in any N scale locomotive and with the included 6 pin & 8 pin harnesses you can use them on OO/HO scale locos as well. Decoder Size - •Length: 13.5mm •Width: 8.5mm •Depth: 3mm Motor drive rating 750mA/1amp, 2 Functions. Each - £29.95 5 Pack - £134.95 (to order)
	DCC Concepts DCD-ZN8D Loco Decoder ZEN NANO 8 Pin Direct 4 Function Decoder with Stay Alive. The smallest 8 pin direct plug decoder in the range. This decoder is smaller than most blanking plates so fitting it into a locomotive will be very easy. Decoder Size - •Length: 15mm •Width: 7mm •Depth: 5mm Motor drive rating 750mA/1amp, 4 Functions. Each - £29.95 5 Pack - £134.95 (to order)
	DCC Concepts DCD-ZN8H Loco Decoder ZEN NANO 8 Pin Wired 2 Function Decoder with Stay Alive. One of the smallest decoders produced by DCC Concepts. This decoder is only 15mm long so it can be hidden inside any locomotive either steam, diesel or electric. Decoder Size - •Length: 15mm •Width: 7mm •Depth: 5mm Motor drive rating 750mA/1amp, 2 Functions. Each - £29.95 5 Pack - £134.95 (to order)
	DCC Concepts DCD-Z360 Loco Decoder ZEN 360 8 Pin Direct 4 Function Decoder with Stay Alive The Zen 360 decoder has been developed to fit in almost any OO/HO locomotive irrespective of DCC socket orientation. As long as your locomotive has an 8 pin socket, this decoder will fit. This decoder has been designed with a twin PCB stacked one on top of the other so you only need to plug it in as it will fit in place of the original blanking plate. Decoder Size - •Length: 14.5mm •Width: 12.5mm •Depth: 3.5mm Motor drive rating 750mA/1amp, 4 Functions. Each - £26.95 5 Pack - £119.95 (to order)
	DCC Concepts DCD-Z218 Loco Decoder ZEN 218 21 & 8 Pin 4 Function Decoder with Stay Alive. The Zen 218 decoder is a very versatile decoder which takes away the choice of which decoder to buy for your new locomotive as it comes complete with both 21 and 8 pin plugs. Due to its size will fit in most OO/HO scale locomotives. Decoder Size - •Length: 22mm •Width: 16mm •Depth: 5mm. Harness length 75mm. Motor drive rating 750mA/1amp, 4 Functions. Each - £26.95 5 Pack - £119.95 (to order)
	DCC Concepts DCP-CB1 Cobalt Omega COBALT Omega Slow Action Analogue Point Motor. Supplied complete including the mounting screws and the very popular double-sided foam mounting pads so there is nothing else needed! Cobalt Classic Ω has been totally re-engineered on the inside to make it quieter and even more durable with added features too: Now the throw-bar is pre-centred and ready to install, no soldering thanks to its spring connectors, switchable power supply range 7 to 18v and THREE switches, each switch is directly linked to the movement of the throw-bar for absolute confirmation of point changing. Typical power requirement 20mA. Can be converted to Digital with the AD series of decoders. Each - £16.95, - - 6 Pack - £94.95 (to order) - - 12 Pack - £184.95 (to order)
	DCC Concepts DCP-CB1ip Cobalt ip Analogue COBALT ip Slow Action Analogue Point Motor. Supplied complete including the mounting screws and the very popular double-sided foam mounting pads so there is nothing else needed! While Cobalt-iP may look almost the same on the outside, it has a totally new and even quieter internal gearing structure, re-designed internal electronics to add actively managed drive speed and at the same time, added an all new microprocessor-controlled “intelligent power” system to make Cobalt-iP perform better than any point motor you have ever seen. : The throw-bar is pre-centred and ready to install, no soldering thanks to its spring connectors, power supply range 7 to 18v and THREE switches only operating if the point has REALLY changed, a direction reverse switch. Standby power 5mA operating power 50mA (typical). Can be converted to Digital with the AD series of decoders. Each - £18.95, - - 6 Pack - £109.95 (to order) - - 12 Pack - £199.95 (to order)
	DCC Concepts DCP-CB1Dip Cobalt ip Digital COBALT ip Slow Action Digital (DCC on-board) Point Motor. Supplied complete including the mounting screws and the very popular double-sided foam mounting pads so there is nothing else needed! Digital fitted version of the Cobalt-iP, with the samegearing structure, microprocessor-controlled “intelligent power” system to make Cobalt-iP perform better than any point motor you have ever seen. The throw-bar is pre-centred and ready to install, no soldering thanks to its spring connectors, power supply range 7 to 18v and TWO switches only operating if the point has REALLY changed, auto centering and direction reverse software. Standby power 5mA operating power 50mA (typical). Digital Fitted - decoder not required. Each - £21.95, - - 6 Pack - £124.95 (to order) - - 12 Pack - £244.95 (to order)